Tuesday, June 25, 2019

Flower Frame!

Hello HH & OCS Fans!
Today I am sharing with you a card I made using the High Hopes stamp called "Thinking of You"! This is an adorable flower frame that comes with the sentiment. I chose to mask off the sentiment as I wanted to use the sweet little button in the center instead.
I used a simple layered design with a Loopy Square die cut frame. My papers are from the Bo Bunny "Sweet Clementine" 6x6 collection. A ribbon bow and some enamel dots finish off my card. 
Here you can see my popped up layers. I popped up the loopy frame and the stamped area, it just adds such a nice dimension to the card.
On the decorated inside I used the High Hopes sentiment stamp called "Quiet Hearts".
Copics Used:
Flowers: R20, R21, R32, R37, R39, C5, Y17
Leaves: YG17, YG23, YG67
Outline: B00, C4

Happy Stamping!


Tuesday, June 18, 2019

Cast Away!

Happy Tuesday HH & OCS Fans!
Meet "Anthony James" from High Hopes Rubber Stamps! This adorable stamp reminds me of my Nephew when he was little at the Cottage. My Dad would take him to a small stream attached to a lake and let him fish. The sunfish were plenty and would bite often. It was perfect because young children don't have the patience to sit all day waiting for a bite.  Now they weren't very big fish but I bet if you ask my Nephew he's say they were huge LOL!
My design today is very simple with just a few paper layers. I used Designer paper from the CC Designs "Hearts and Dots and the YNS "Summer Plaid" 6x6 collection. A bit of natural twine and some Black Diamond Stickles on his buttons finish off my design.
Here's the decorated inside using more of the designer papers and a sentiment from the High Hopes "Sentiment Set #1".
Copics Used:
Skin: E00, E04, E11, E21, E20
Hair & boots: E44, E47, E49
Outfit: YG93, YG95, YG97, YG99/ YR02, YR04, YR06/ Y21
Pole: E35, Silver Wink of Stella, N6
Fish: C0, BG57, BG78, BG96

Thanks for stopping by!
Happy Stamping!


Saturday, June 15, 2019

Happy Birthday!

Happy Saturday!!
Today I wanted to share with you an adorable digital image from Digi Doodle Studios called "Rosalie's Gifts". Rosalie is from the newly released "Birthday Bash" digital stamp collection. Dina always designs the cutest stamps!
To start, I downloaded my stamp, resized it to my liking and printed it off using my printer. Using my Copic Sketch Markers, I coloured Rosalie to match my designer papers. These papers are from the Digi Doodle "It's My Party" digital paper collection. A bit of ribbon, bow and Diamond Stickles on the polka dots finish off my card!
Copics Used:
Skin: E00, E11, E21, R20, RV17
Hair: E43, E44, E47, E49
Dress: B02, B04, B06
Presents: B02, B04, B06, B63, B66, RV14, RV17, RV19, BG11, BG13, YR21, YR23, YR24

Thanks for stopping by today! Enjoy your weekend!
Happy Stamping!

Tuesday, June 11, 2019

Surfer Dude!

Happy Tuesday Everybody!
So Tuesday means it's my turn to post some inspiration over on the High Hopes and One Crazy Stamper Blogs! With summer right around the corner, I thought "Bob's A Surfer Dude" from High Hopes was perfect for my post today. I have to admit Bob makes it look easy! When we were in Hawaii we took surfing lessons and lets just say I better just stay with card making a surfer LOL. It was a disaster! I don't think I even made it upright once! Hubby on the other hand was a natural!
I am using paper from an older Carta Bella 6x6 collection called "Beach Days". I coloured Bob and then paper pieced his swim shorts and surf board with paper from the pad. Then I used my Brother Cut N Scan to fussy cut out the image. I decided Bob needed to be on an action wobble for a bit of fun!
Here you can see the action wobble and some of the dimension I added to the card using foam squares!
I decorated the inside and added a sentiment from the "Sentiment Set #4" that matches my card theme perfectly!
Here's a short clip of Bob in action!
Copics Used:
Skin: E00, E21, E95, R20
Hair: E31, E35, E47, E49, E57
Glasses: B28, B29
Waves: BG0000, BG000, BG01, BG02, white gel pen

Hang ten and.....
Happy Stamping!


Tuesday, June 4, 2019

Go Bananas!

Hello To Everyone!
For my post today, I'd like you to meet "Large Monkey Mike" from High Hopes Stamps! Isn't he just a sweetie?!! When I saw Mike I knew I wanted to have him swinging from the trees.
I used my new MFT Interactive Swing die to make "Large Monkey Mike" appear to be swinging in the palm trees. You need to cover up the swing element and allow room for it to "swing". I decided to cut some palm leaves in two sizes using my Cameo and a svg file. Then I took a piece of the same colour as the leaves and glued them on top to hide it. This way I had a piece I could mount with foam tape to hide and allow the swinging action. I created the background using some water-colour paper and Ken Oliver Colour Burst powders. I inked all the edges of the card and palm leaves with some Vintage Photo ink for added dimension. I used the HH "Swinging Birthday" sentiment and masked it off to only use the top half of the sentiment.
On the inside I used more of the Ken Oliver Powders and a straw to make it match the outside colours. I love the fun HH sentiment called "Go Bananas" that I used on the inside. I also fussy cut out a banana from it to add to Mike's hand on the outside.
Here's a short clip of "Large Monkey Mike" in his swinging action!
Copics Used:
Monkey: E50, E51, E53, E55, E57, E59
Banana: Y32, Y35, YG93, YG95

Thanks for "swinging by" today!
Happy Stamping!

Saturday, June 1, 2019

Digi Doodle Studios June Challenge!

Hello Everyone!
Today marks the start of a new Challenge over on the Digi Doodle Studios Challenge Blog for June. You have all month to create something with the theme of "Special Day". Think Father's Day, birthday, wedding, anniversaries. Today I am using the DDS digital stamp called "Valentino"  to celebrate Father's Day.
I started by sizing and then printing my digital image with my printer. Then using my Copic Markers coloured "Valentino" in to match my papers. I hand drew in some plaid lines for a fun look to his top. The designer papers are also from Digi Doodles and are called "Coffee Break". I made the sentiment up myself on my computer and printed it. I thought it went well with the image. My card layout was created using an older MFT Blueprints 1 die set. I don't think it's available anymore but sure helps make your layout come together fast. I decided to ink all the edges of my papers with some Vintage Photo Distress Ink. I think it helps make everything pop a bit more.
On the inside of my card, I used some of the leftover "Coffee Break" papers to decorate it and added a sentiment from the DDS "Encouragement" digital sentiments collection.

Here is the original Valentino digital image from Digi Doodle Studios. I have to admit a "boo boo" I made LOL. I wasn't paying attention when I cut the image out with My Brother Cut N Scan, and made a mess of the hearts. I had already coloured my image and didn't want to waste it, so I left the hearts off. Valentino is much cuter with the heart song notes coming from the birds. Lesson learned lol!
Copics Used:
Skin: E01, E11, E21, R20
Hair and stump: E31, E35, E47, E49, E57
Outfit: BG 93, BG97, BG99, C1
Birds: B25, B28, B29
Guitar: E51, E53, E55, E57

Thanks for stopping by! Don't forget to make something crafty and link it up for the Digi Doodle Studios Monthly Challenge for June!

Happy Stamping!